Tradition in Excellence since 1869...

Call us on +44 (0) 1743 232 200

Cora F Neat Cutting Oil ZOOM

Cora F Neat Cutting Oil

Code: COF

Cora F is a high additive neat cutting oil recommended for a wide range of operations, especially those of a more arduous nature involving hardened steels and hardened non-ferrous alloys. High levels of extreme pressure and lubricity additives help reduce tool wear and tool breakages whilst improving surface finishes. The low viscocity ensures the product has excellent penetration, particularly important in tapping and deep hole drilling applications. Special base fluids ensure low misting tendency and low volatility in use. Lower volatility and improved oxidation stability impart longer sump life and lower top up rates. Cora F is non-staining to copper and its alloys.

Please refer to Technical Data Sheet for the latest features and applications information. This will be located on the Downloads tab. If you require any further assistance please use our 'Ask the Expert' facility. For urgent technical enquiries call us directly on +44 (0) 1743 237541, during office hours.

Please use our WHATOIL? facility to check if this product is suitable for you needs.

.

Please refer to Technical Data Sheet for the latest features and applications information. This will be located on the Downloads tab. If you require any further assistance please use our 'Ask the Expert' facility. For urgent technical enquiries call us directly on +44 (0) 1743 237541, during office hours.

Please use our WHATOIL? facility to check if this product is suitable for you needs.

* Required Fields

Ask the Expert
  •  
Make an Enquiry
WhatOil