Tradition in Excellence since 1869...

Call us on +44 (0) 1743 232 200

Terza M 107 ZOOM

Terza M 107

Code: TZM

Terza M-107 is a high quality low viscocity mould release oil containing low odour hydrocarbon solvent, reactive fat and lubricity additives. It has been specially produced for use in high rate production of concrete roof tiles, on the type of machines where the moulds are continuously chain driven past the pouring hopper. This is a low viscocity fluid, which after evaporation of the solvent, dries to a tenacious oily film on the mould surface. The low viscocity helps the film to flow and cover the mould surfaces, and spread into the less accessible areas. It is an excellent release agent that prevents concrete clinging to the moulds, and provides a high quality surface finish. At the end of each shift, when the machines have been hosed and brushed down, Terza M-107 should be brushed over the moulds and machine surfaces, to release any stuck concrete and dewater all the surfaces keeping them in good condition and free of rust. The machine is then ready for immediate use at the start of the next shift, and problems of wastage on start up are eliminated. Terza M-107 does not cause stains or discolouration, is not absorbed by the concrete and does not interfere with the drying out process. It is a very low odour product and does not contain wool fat or potentially harmful gas oil.

Please refer to Technical Data Sheet for the latest features and applications information. This will be located on the Downloads tab. If you require any further assistance please use our 'Ask the Expert' facility. For urgent technical enquiries call us directly on +44 (0) 1743 237541, during office hours.

Please use our WHATOIL? facility to check if this product is suitable for you needs.

.

Please refer to Technical Data Sheet for the latest features and applications information. This will be located on the Downloads tab. If you require any further assistance please use our 'Ask the Expert' facility. For urgent technical enquiries call us directly on +44 (0) 1743 237541, during office hours.

Please use our WHATOIL? facility to check if this product is suitable for you needs.

* Required Fields

Ask the Expert
  •  
Make an Enquiry
WhatOil